What Is a Sewer Smoke Test? How It Tracks Down Smells

The smell shows up Tuesday, right after the dishwasher runs. By Thursday it’s gone. You sniff around the bathroom, the basement, and the yard and find nothing. Saturday it comes back, just in time for company.

A sewer smoke test is how we track down a smell like that. Here’s how the test works, what it finds, and what it costs. If your city sent you a smoke testing notice, there’s a section for you too.

What Is a Sewer Smoke Test?

A sewer smoke test uses a machine that pumps smoke into your drain and vent pipes. The smoke travels through the pipes and out your roof vents, which is normal. Anywhere else it shows up is a leak.

Sewer gas follows the same path as the smoke. A spot where smoke escapes is a spot where sewer gas can escape too, and that’s often the smell you’ve been chasing.

What Happens During a Smoke Test?

The technician connects the smoke machine to your drain system, usually at a cleanout or another access point, and starts it. Smoke fills the pipes while the technician walks the property, inside and out, looking for smoke where there shouldn’t be any.

The usual places to check are the roof vents, the yard, the foundation, and the area around your fixtures. When smoke shows up somewhere it doesn’t belong, the technician marks the spot. The result is a clear answer on where air is escaping.

From there, we go over your options before any work starts. The fix can run from sealing a loose joint to sewer line repair for a cracked pipe, or replacement for a badly damaged line.

What Does a Smoke Test Find?

A smoke test reveals anything that lets air out of your drain system. That includes:

  • Cracked or broken sewer pipes
  • Loose or failed pipe joints
  • Broken or disconnected vent pipes
  • Missing or loose cleanout caps
  • Dry drain traps

     

Dry traps are the easiest cause to overlook. A drain trap is the curved pipe under a sink that holds a little water to block sewer gas. In a guest bathroom nobody uses, that water evaporates, and sewer gas comes up the drain. It’s a common reason a bathroom drain smells like sewage.

Will the test find your smell? Most of the time, yes, because the smoke leaks out wherever the gas does. The test has limits, though. Smoke shows leaks. It can’t show a clog or what the inside of the pipe looks like. When we need that, we follow up with a sewer camera inspection.

If the smell is strongest outside, the cause may be your septic system or a leak in the yard. Our post on why your yard smells like sewage walks through those causes.

Is a Sewer Smoke Test Safe?

Yes. The smoke is non-toxic and non-staining, so it won’t leave marks on your walls or furniture. Any smoke that drifts inside fades within a few minutes.

It does look dramatic when it curls out of a roof vent, so give the neighbors a heads up. Nothing is on fire. If you see smoke inside your home, tell the technician right away. That spot is a leak, a dry trap, or a blocked vent, which is exactly what the test is built to find.

When Should You Schedule a Smoke Test?

Three situations call for one: a smell that comes and goes, a smell with no obvious source after you’ve checked the drains you know about, and a smell that stayed after a drain cleaning. A smoke test turns a guessing game into a map of where the leak is.

How Long Does a Smoke Test Take, and What Does It Cost?

Most tests take about one to three hours. A bigger system, hard-to-reach pipes, or a lot of drains to check adds time.

Cost depends on the size of your system, how easy the pipes are to reach, and how long the test takes. We give you a free estimate before we start, so you know the number up front. A small home with easy access takes less time than a large system with a lot to check.

Can You Do a Smoke Test Yourself?

Real smoke testing takes a smoke machine that pushes smoke through the whole system, and that is professional equipment.

You can do one useful check on your own. Run water for a minute in any drain you rarely use, like a guest bath, a utility sink, or a basement floor drain. If the smell fades, a dry trap was likely the cause. If it comes back, the test is your next step.

What If the City Is Smoke Testing My Street?

Cities smoke test their public sewer lines too, for the same reason. A crew sends smoke into the main through the manholes and watches for it in places it shouldn’t be. The test turns up cracked pipes, broken manholes, uncapped lines, and illegal connections like roof drains or sump pumps tied into the sewer. Cities usually warn residents ahead of time with door hangers, mailers, or ads.

Do you need to do anything? Usually not. Read the notice and follow any steps it lists, since each city runs its own program. Pouring water down rarely used drains beforehand keeps the traps full. If smoke does come into your home, it’s non-toxic and fades after several minutes. Smoke inside can also mean a blocked vent or a dry trap. If something seems unusual, call your fire department.

A city test checks the public sewer. If a smell hangs around your house after the crew leaves, a smoke test of your own plumbing is the next step.

Schedule a Sewer Smoke Test

We help homeowners in Jefferson City, Columbia, and the rest of mid-Missouri track down smells that are hard to find.

Contact Superior Sewer Solutions at 573-301-0141 to schedule a sewer smoke test and find where that smell is coming from.